Dimensions : 250 x 75.6 x 83.8mm
Application : For standard, advanced server and storage power system.
Watt : 600W


FSP600-50ERS is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 600 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.


For standard, advanced server and storage power system.


  • Remarkable power density
  • Excellent redundant PSU efficiency
  • Operating altitude complies with 5Km certification
  • Well working performance at 50℃ (24 house running)
  • Low ripple and noise
  • Support OTP, OVP, OCP and SCP circuit protection
  • Comply with FCC, CB, TUV, CE and CCC certification or declaration requirement

Model Name FSP600-50ERS
Wattage 600W
Dimension 250mm (L) × 75.6 mm (W) × 83.8mm (H)
Product Highlight Efficiency Level 80 Plus Platinum
Altitude 5000M
PMBus For standard, advanced server and storage power system.
General Specification Effciency 92% 230VAC
Voltage Regulation +3.3V, +12V, +5V, +5SB: ±5%
-12V: ±10%
Input Electrical Specification Input Frequency 47 ~ 63 Hz
Input Current 115V@ 8.0 Amps-rms maximum,
230V@ 4.0Amps-rms maximum
Output Specification Hold-up time 115V/60Hz 16mSec. Minimum@100% Load,
230V/50Hz 16mSec. Minimum@100% Load
Ouput Voltage Regulation +3.3Vdc output : +3.9 Vdc minimum, + 4.5Vdc maximum
+5Vdc output : +5.7 Vdc minimum, + 6.5Vdc maximum
+12Vdc output : +13.3 Vdc minimum, + 14.5Vdc maximum
Ripple & Noise 115V-rms/230V-rms 5V 20ms Maximum
115V-rms/230V-rms 12V 20ms Maximum
Over current protection 3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
Environmental Requirement Temperature Range Operating : 0 to +50℃
Storage :-40 to +70℃
Humidity Operating : 85% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing
MBTF The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, 70% output load, and nominal AC inout voltage

Output Voltage and Current Rating

+3.3V +5V +12V1 -12V +5Vsb
Ripple-Noise(R-P) mV 50mV 50mV 120mV 120mV 50mV
Regulation Load % ±5% ±5% ±5% ±10% ±5%
Output Max.(A) 20A 20A 45A 0.3A 5A
Output Min.(A) 0.5A 0.5A 0.5A 0A 0A


  • 5V, 3.3V, 12V, -12V Will gave the regulation to 10% when all load take off.
  • Maximum combined current for the 12V outputs shall be 45A
  • The +3.3V and +5V total output shall not exceed 140 watts.
  • The total output shall not exceed 600 watts

Contact us

Web Analytics